HP Color LaserJet Pro MFP M182nw - Manual (Page 97)

Interpret control-panel light patterns (LED control panels only)
If the printer requires user confirmation, the LED control panel alternates between Go and a two-digit status
code. If the printer requires attention, the LED control panel alternates between Er and a two-digit error code.
Use the table below to determine any issues with the printer.
Table 9-2 Status-light legend
Item Description
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Table 9-3 The Attention light is blinking
Error code State of the printer Action
Go/01 The printer is in manual-feed mode. Load the correct paper type and size into
the input tray. Press the Start Mono Copy
button
to continue.
Go/02 The printer is processing a manual duplex
job.
Load the pages into the input tray to print
the second sides. Press the Start Mono Copy
button
to continue.
Go/03 Print job is different from the user's settings. Load plain paper or press the Start Mono
Copy button to continue with the
paper currently loaded.
Er/01 The input tray is empty. Load the tray.
Er/02 A door is open. Verify that the top cover is fully closed.
Er/03 The printer failed to pick a sheet of paper to
print.
Press the Start Mono Copy button to
continue.
Er/04 Paper is jammed in the input tray. Clear the jam.
Er/05 Paper is jammed in the toner cartridge area. Clear the jam.
Er/06 Paper is jammed in the output bin area. Clear the jam.
Er/25 The loaded paper is not the size needed for
the print job.
Replace the paper, or press the Start Mono
Copy button
to continue with the size
currently loaded.
ENWW Interpret control-panel light patterns (LED control panels only) 87