Nikon Z9 Mirrorless Camera - Manual (Page 326)

326 Computers: Connecting via USB
D macOS
If Nikon Transfer 2 does not start automatically, confirm that the camera is
connected and then launch Image Capture (an application that comes with
macOS) and select Nikon Transfer 2 as the application that opens when the
camera is detected.
D Caution: Transferring Videos
Do not attempt to transfer videos from the memory card while it is inserted
in a camera of a different make or model. Doing so could result in the videos
being deleted without being transferred.
D Cautions: Connecting to Computers
• Do not turn the camera off or disconnect the USB cable while transfer is in
progress.
• Do not use force or attempt to insert the connectors at an angle. Be sure
also to keep the connectors straight when disconnecting the cable.
• Always turn the camera off before connecting or disconnecting a cable.
• To ensure that data transfer is not interrupted, be sure the camera battery
is fully charged.
D USB Hubs
Connect the camera directly to the computer; do not connect the cable via a
USB hub or keyboard. Connect the camera to a pre-installed USB port.