Nikon Z9 Mirrorless Camera - Manual (Page 723)

723 B The Setup Menu: Camera Setup
Pixel mapping checks and optimizes the camera image sensor. If you
notice unexpected bright spots appearing in pictures taken with the
camera, perform pixel mapping as described below.
• Pixel mapping is available only when a Z mount lens or an optional
FTZ II/FTZ mount adapter is attached.
• To prevent unexpected loss of power, use a fully-charged battery, the
supplied charging AC adapter, or an optional AC adapter and power
connector.
• To start pixel mapping, select [ Start ]. A message is displayed while the
operation is in progress.
D Cautions: Pixel Mapping
• Do not attempt to operate the camera while pixel mapping is in progress.
Do not turn the camera off or remove or disconnect the power source.
• Pixel mapping may not be available if the camera’s internal temperature is
elevated.
Pixel Mapping
G button
U B setup menu