NETGEAR GS110EMX 8-Port SmManaged Plus Gigabit Switch - Manual (Page 23)

The default password is
password
. The password is case-sensitive.
The Switch Information page displays.
6. From the DHCP Mode
menu, select
Disable
.
The IP address fields become available.
7. Enter the fixed (static) IP address that you want to assign to the switch and the
associated subnet mask and gateway IP address.
8. Write down the complete fixed IP address.
You can bookmark it later.
9. Click the
Apply
button.
Your settings are saved. Your switch web session is disconnected when you change
the IP address.
10. Disconnect the switch from your computer and install the switch in your network.
For more information, see Set Up the Switch in Your Network and Power On the
Switch on page 15.
11. Restore your computer to its original IP address.
12. Verify that you can connect to the switch with its new IP address:
a. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection.
b. Launch a web browser.
c. In the address field of your web browser, enter the new IP address of the switch.
The login page displays.
d. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The Switch Information page displays.
User Manual 23 Install and Access the Switch in
Your Network
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX