NETGEAR GS110EMX 8-Port SmManaged Plus Gigabit Switch - Manual (Page 68)

To restore the switch configuration that you saved:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The Switch Information page displays.
5. Select System > Maintenance > Restore Configuration
.
The Restore Configuration page displays.
6. Click the Browse
button and locate and select the saved configuration file (a .cfg
file).
7. Click the Apply
button.
The saved configuration is restored to the switch.
Return the Switch to Its Factory Default
Settings
Under some circumstances (for example, if you lost track of the changes that you made
to the switch settings or you move the switch to a different network), you might want to
erase the configuration and reset the switch to factory default settings.
To reset the switch to factory default settings, you can either use the
Factory Defaults
button on the front panel of the switch or use the reset function in the local browser
interface. However, if you changed and lost the password and cannot access the switch,
you must use the
Factory Defaults
button.
After you reset the switch to factory default settings, the password is password and the
switch’s DHCP client is enabled. For more information, see Factory Default Settings on
page 78.
User Manual 68 Manage and Monitor the Switch
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX