NETGEAR GS110EMX 8-Port SmManaged Plus Gigabit Switch - Manual (Page 79)

Basic Technical Specifications
The following table shows the basic technical specifications of the switch.
For more specifications, see the data sheet that you can download by visiting
downloadcenter.netgear.com.
Table 7. Basic technical specifications
Description Feature
IEEE 802.3 Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3bz 2.5GBASE-T and 5GBASE-T
IEEE 802.3an 10GBASE-T
IEEE 802.3i 10BASE-T
IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging IEEE standards
Eight RJ-45 ports (ports 1 through 8) that support 1000BASE-T, 100BASE-TX, or
10BASE-T
Two RJ-45 ports (ports 9 and 10) that support 10GBASE-T, 5GBASE-T, 2.5GBASE-T,
1000BASE-T, or 100BASE-TX Network interfaces
For 100 Mbps, use a Category 5 (Cat 5) or higher rated cable. Network cable
For 1 Gbps, 2.5 Gbps, or 5 Gbps, use a Category 5e (Cat 5e) or higher rated cable.
For 10 Gbps for up to 55 meter (180 feet), use a Category 6 (Cat 6) or higher rated
cable.
For 10 Gbps for more than 55 meter (180 feet), use a Category 6A (Cat 6A) or higher
rated cable.
The power adapter is localized to the country of sale.
Output: 12V, 2.5A Power adapter
15.6W Maximum power
consumption
9.29 x 4.02 x 1.06 in. (236 x 102 x 27 mm) Dimensions (W x D x H)
1.65 lb (0.75 kg) Weight
32º to 104ºF (0° to 40°C) Operating temperature
90% maximum relative humidity, noncondensing Operating humidity
10,000 ft (3,000 m) maximum Operating altitude
–4° to 158°F (–20º to 70ºC) Storage temperature
User Manual 79 Factory Default Settings and
Technical Specifications
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX