Adjusting the output tray – Kodak S3060 Document Scanner User Manual

Page 30

Advertising
background image

22

A-61981 20 April 2022

-

Document lengths more than 17 inches / 43.2 cm

— if you are

scanning documents longer than 17 inches / 43.2 cm, the scanner driver

must

be set to accommodate these long documents. Be sure to verify that

the

Maximum Length

option on the Device-General tab (TWAIN

Datasource) or the

Longest Document

option on the Scanner tab (ISIS

Driver) is set to longer than the longest document being scanned.

NOTE:

• Operator assistance may be required for scanning documents greater

than 17 inches / 43.2 cm. Other scanner driver settings may limit the

length of the document that you can scan.

• It is recommended that you use a document extender if you are

scanning documents longer than 17 inches (43.2 cm). See page 60 for

a link containing available Supplies and Consumables.

Adjusting the output

tray

You can adjust the output tray to aide in keeping your scanned documents

organized.

Adjusting the angle of the output tray

— lift the front of the output tray

and the height adjustment tab will release from underneath the output tray.

To lower the output tray, gently push the height adjustment tab underneath the

output tray while lowering the output tray. This may improve output stacking.

Advertising