Elektron Analog Heat + FX Hybrid Digital/Analog Sound Processor - Manual (Page 17)

6. THE SETTINGS MENU
17
6. THE SETTINGS MENU
Here follows a description of all the parameters that are in the SETTINGS menu. You access the SETTINGS
menu by pressing the [SETTINGS] key. Scroll through the list of settings by using the NAVIGATION knob.
Open a highlighted menu by pressing the NAVIGATION knob or [YES] . To change the settings in the menus,
first press and then turn the NAVIGATION knob.
6.1 PRESET CONFIG
6.1.1 ANALOG MODE
Disables the digital FX blocks, which makes the Analog Heat +FX audio path analog when this option is
enabled.
6.1.2 VOLUME
Preset Volume sets the overall level of the preset. This parameters is also a modulation destination.
6.2 INPUT SENSITIVITY
Sets the audio input level to fit the audio level sent to the effect via the IN L/R inputs. It is important to set
this level correctly to get the best sound from your Analog Heat +FX. There are four different settings for
the input sensitivity: LOW, MID, HIGH & MAX. Low is the most silent, Max is the loudest. For more informa-
tion, please see “3.2 SETTING THE INPUT SENSITIVITY LEVEL” on page 10.
• LOW (Maximum input level 10.5 V, peak to peak)
• MID (Maximum input level 5.3 V, peak to peak)
• HIGH (Maximum input level 2.5 V, peak to peak)
• MAX (Maximum input level 1.2 V, peak to peak)