Elektron Analog Heat + FX Hybrid Digital/Analog Sound Processor - Manual (Page 20)

6. THE SETTINGS MENU
20
You can use the Analog Heat +FX as a regular audio interface and let signals pass in and
out unaffected by the effect. At the same time, you can, via Overbridge, also use the effect
to process another set of audio signals.
AUTO mode is suitable for most use cases. It lets the Analog Heat +FX function both as a
standalone effect and together with Overbridge as a plugin, while still retaining its func-
tionality as a sound card.
6.5.2 ANALOG IN/OUT (IN USB AUDIO/MIDI MODE)
Sets if the signal from the analog inputs (INPUT L/R) is routed to the effect or not. It also sets if the
signal from the FX is routed to analog outputs (OUTPUT L/R and HEADPHONES) or not. These are the
settings if USB AUDIO+MIDI mode is chosen in the USB CONFIG menu. For more information, please
see “6.8.1 USB CONFIG” on page 23.
FX BLOCKS
CLASS COMPLIANT
USB AUDIO HOST
ANALOG IN ANALOG OUT
IN OUT
Analog Heat +FX
• AUTO In AUTO mode, Analog Heat +FX automatically detects if a class compliant USB audio host
(computer, smartphone, etc.) is connected or not. If no USB audio host is connected, the signal is
routed from Analog In through the FX to the Analog Out. (Same as the IN+OUT setting.) With the
USB audio host connected, the audio routing in AUTO mode depends on which option is selected
by the USB CC MODE parameter :
INSERT sets ANALOG IN/OUT to IN+OUT.
PRE sets ANALOG IN/OUT to OUT.
POST sets ANALOG IN/OUT to IN.
BYPASS sets ANALOG IN/OUT to OFF.
• IN+OUT Both Analog In and Analog Out are routed to the FX.
• IN Routes the signal from Analog In to the FX.
• OUT Routes the signal from the effect to Analog Out.
• OFF Neither Analog In nor Analog Out are routed to the FX.
6.5.3 USB CC MODE
Sets how and where, in the signal chain, the signal between the Analog Heat +FX and the class com-
pliant USB audio host (computer, smartphone etc.) is routed. This parameter is only available if USB
AUDIO+MIDI mode is chosen in the USB CONFIG menu. For more information, please see “6.8.1 USB
CONFIG” on page 23.
FX
CLASS COMPLIANT
USB AUDIO HOST
ANALOG IN ANALOG OUT
Analog Heat +FX
USB TO MAIN
INSERT Routes the audio bi-directionally over USB between the FX (distortion circuit, EQ, and filter) and
the USB audio host.
• PRE Routes the audio from Analog In to the USB audio host and then back to the FX.
• POST Routes the audio from the FX to the USB audio host and then to the Analog Out.
• BYPASS Routes the audio from Analog In to the USB audio host and then to Analog Out without
being affected by the FX.