Elektron Analog Heat + FX Hybrid Digital/Analog Sound Processor - Manual (Page 18)

6. THE SETTINGS MENU
18
6.3 OPTIONS
6.3.1 PAGE MENU
Will, when selected, display a popup parameter page menu when turning NAVIGATION on a parameter
page.
6.3.2 FX PAGE ORDER
Sets the order in which the FX parameter pages are displayed.
• FLOW follows the order of how the FX blocks are arranged on the FLOW page.
• ALPHA sorts the pages in alphabetical order .
• FIXED the order is fixed based on the order on the INIT preset.
6.3.3 ACTIVE AT START
Sets if Analog Heat +FX is in Active Mode or not when it is turned on.
6.3.4 KNOB MODE
Sets how the knobs on the panel affect the parameters. When you load a preset, the knobs positions
typically don’t match their parameter values.
• JUMP immediately sets the value to the current knob position.
• In CATCH mode, turning the knob do not change the parameter value until the knob position match-
es the presets stored value.
You can see the current value of the parameter in the screens title bar while you turn the knob.
6.4 CONTROL IN
6.4.1 CONTROL IN A
• CONTROL MODE
Sets the port mode to adjust to different kinds of input signals. There are four modes: CV (Control
Voltage), EXPR (Expression Pedal), FOOTSW (Footswitch) and OFF .
• CV ZERO LEVEL (Available when mode is set to CV.)
Sets the Volt level at which CV modulation amount is zero. A control input level equal to this setting
corresponds to zero modulation. (-5.50 V–+5.50 V).
• CV MAX LEVEL (Available when mode is set to CV.)
Sets the Volt level at which CV modulation amount is max. A control input level equal to this setting
corresponds to full modulation. (-5.50 V–+5.50 V).
• EXPRESSION LEARN (Available when mode is set to EXPR.)
Sets the highest and lowest limit of the control input level. When in this setting, connect the Expression
pedal to CONTROL IN A/B . Press YES and then move the expression pedal first to max and then to
min position. Press YES to save settings.
• REVERSE DIRECTION (Available when mode is set to EXPR.)
Reverses the direction of how the Expression pedal sends control input signals.
• FOOTSW DEST (Available when mode is set to FOOTSW.)