Elektron Analog Heat + FX Hybrid Digital/Analog Sound Processor - Manual (Page 23)

6. THE SETTINGS MENU
23
6.7.1 SYSEX SEND
Here settings and Presets can be sent to an external device via the MIDI OUT port or the USB port of the
Analog Heat +FX.
The column to the left selects what will be sent. Use the NAVIGATION knob to navigate in the column.
The SysEx data send alternatives located in the column to the right will change depending on the selec-
tion made in the left column. Press [YES] to access this column. Use the NAVIGATION knob to select
what will be sent. Press [YES] to initiate the SysEx send procedure.
SETTINGS will send all the Analog Heat +FX settings to the receiving device.
PRESET will send the selected Preset (or all Presets) to the receiving device.
6.7.2 SYSEX RECEIVE
Here settings and Presets can be received from an external device via the MIDI IN port or the USB port
of the Analog Heat +FX.
The column to the left selects what will be received. Use the NAVIGATION knob to navigate in the col-
umn. The SysEx data receive alternatives located in the column to the right will change depending on
the selection made in the left column. Press [YES] to access this column. Use the NAVIGATION knob to
select what will be received. Press [YES] to initiate the SysEx receive procedure. The Analog Heat +FX
starts listening to incoming data. Press [NO] to stop listening.
RECEIVE ANY listens to and receives any viable SysEx data (settings, Presets).
PRESET receives and stores a Preset to the selected slot.
6.8 SYSTEM
6.8.1 USB CONFIG
• OVERBRIDGE
To use the Analog Heat +FX as an Overbridge device, select Overbridge mode. (ON, OFF)
• USB MIDI
Select this option If you wish to send MIDI over USB and disable the Overbridge integration func-
tionality. (ON, OFF)