Datavideo SHOWCAST 100 4K Switcher with Built-In Streaming Encoder User Manual
Page 19
19
FTB
Fade To Black, this button fades the current
program video to black. When pressed again it
acts in reverse from complete black to the
currently selected program video source.
Transition speed can be set in the
PIP
Pressing the PIP button enables picture in picture
view which puts the selected Sub Video Source in a
window on the Main Program view, with control
over window size and placement. For PIP
configuration, please refer to the
section.
LUMA Keyer
Pressing the LUMA button shows the luma key
source on the PGM output and enables the luma
key effect, however, the luma key effect cannot be
previewed on the Multiview screen.
WIPE/MIX
A MIX, also known as a dissolve, is a transition
wherein the Program video is replaced by the
Preview video at a smooth rate, and at the same
time.
A WIPE transition moves from one video to another
with a sliding animation, making it look like the
video image is literally wiped away to reveal the
next.
First use the OSD menu to select the WIPE or MIX
effect (see
) then press the WIPE/MIX
button to start video transition with the enabled
effect. Transition speed can be set in the
menu.
Audio Control
Volume Adjustment Knobs
The five volume adjustment knobs control audio
levels of the audio I/O.
CH1: LINE CH1 input
CH2: LINE CH2 input
AUX: RCA IN
Digital: HDMI IN
Master: Main audio output