Datavideo SHOWCAST 100 4K Switcher with Built-In Streaming Encoder - Manual (Page 37)

37
Save Setup
Select “Save” to save the current configuration.
Factory Default
Once selected, the factory default settings will be restored. The device will start the factory reset
process in 2 to 3 seconds.
Language
The available OSD menu languages are English, Traditional Chinese and Simplified Chinese.
Firmware Version
This displays the device’s current firmware version.
Firmware Upgrade
See Appendix 3 for firmware upgrade procedure.
3.8 Camera
In the “Camera” menu, the user will be able to change the camera name, view camera information and
perform some basic camera settings. The basic camera settings include the video format, mirror mode,
PAN/TILT direction and etc.
Main Sub-Menu Options or Values Default Value
Camera
Scan [Scan]
Camera
Camera 1
Camera 2
Camera 3 Camera 1
Tally Mapping
Input 1
Input 2
Input 3
Input 4 Input 1
Camera Control
DVIP
RS-422
RS-232 DVIP
Baud Rate
9600
19200
38400
57600
115200 115200
IP
The linked camera’s IP
address. Will show
“NONE” if no camera is
detected.
Camera Info
Vendor ID These camera info will
be displayed; will show
“None to link!” if no
camera is detected.
MB Version
FPGA Version
Motor Version
DVIP Version