Datavideo SHOWCAST 100 4K Switcher with Built-In Streaming Encoder - Manual (Page 40)

40
R-Gain
Adjust R-Gain to add or reduce the intensity of the red color.
B-Gain
Adjust R-Gain to add or reduce the intensity of the blue color.
Tally LED
Tally LED: You can either turn the tally light off or enable the red or green tally light.
Menu
Tap to open the selected camera’s OSD menu.
Enter
Tap to select an OSD menu option.
3.9 Network
The “Network” menu allows you to select and enter SHOWCAST 100’s DVIP port settings for connecting
up to three Datavideo’s PTZ cameras such as PTC-150.
Main Sub-Menu Options or Values Default Value
Network
Address Mode
DHCP
Fixed IP
IP Address
Network Mask
Gateway
Primary DNS
Secondary DNS
MAC Address
Network Def
IP Save [IP Save]
[Reset All]
Address Mode
In DHCP mode, the router automatically assigns the IP address to the device. If you want to manually
configure the network settings, disable this option.
If the Fixed IP is selected, the static IP field will be activated for the user to manually enter the IP
address. The static IP address is 192.168.1.XXX by default.
IP Address
Manually enter the device’s IP address if Fixed IP mode is selected.
Network Mask
Fixed IP mode requires the network mask, which is 255.255.255.0 by default.
Gateway
Fixed IP mode requires the default gateway, which is 192.168.1.254 by default.
Primary DNS
Primary DNS is required in Fixed IP mode only but is optional.