Datavideo SHOWCAST 100 4K Switcher with Built-In Streaming Encoder - Manual (Page 30)

30
Position X
Adjusting Position X moves the PIP window horizontally. Decrementing Position X moves the PIP
window left and incrementing Position X moves the PIP window right.
Position Y
Adjusting Position Y moves the PIP window vertically. Decrementing Position Y moves the PIP window
down and incrementing Position Y moves the PIP window up.
Split Source
The Split mode, once enabled, splits the PROGRAM output display into two windows with the PGM OUT
shown on the left and the split source shown on the right. The Split source, i.e. the program out view,
can be selected from the list below:

Black

Input 1

Input 2

Input 3

Input 4

Background

Color Bar
Border Size
The Border Size generally allows the user to select an appropriate PIP border width. Setting the Border
Size to OFF turns the PIP border off. Setting the border size to small selects a thin border; middle will
yield a medium size width; large is the maximum PIP border width.
Border Color
The user is allowed to assign a PIP border color. The available colors are listed as follows:

White

Yellow

Cyan

Green

Magenta

Red

Blue

Black
PIP/Split Mode
Selecting PIP places a sub window on the PGM or PVW screen. The Split mode, once enabled, splits the
PROGRAM output display into two windows with the PGM OUT shown on the left and the split source
shown on the right.
PGM
Turning ON PGM places the PIP window on the PGM screen.
PVW
Turning ON PVW places the PIP window on the PVW screen.