Installation instructions, Prepare built-in oven, Remove oven door(s) – JennAir Euro-Style Series 30 Inch Double Combination Smart Electric Wall Oven Installation Instructions User Manual

Page 6: Prepare built-in oven remove oven door(s), Warning

Advertising
background image

6

INSTALLATION INSTRUCTIONS

Prepare Built-In Oven

1.

Decide on the final location for the oven. Avoid drilling

or cutting into house wiring during installation.

2.

To avoid floor damage, set the oven onto cardboard prior

to installation. Do not use handle or any portion of the front

frame for lifting.

3.

Remove the shipping materials and tape from the oven.

Remember to keep the corner posts and other materials

that may be needed for installation.

4.

Remove the hardware package from inside the bag

containing literature.

5.

Remove and set aside racks and other parts from

inside the oven.

6.

Move oven and cardboard close to the oven’s final location.

Remove Oven Door(s)

IMPORTANT:

Use two hands to remove oven door. For double

ovens, repeat the process for each door.

1.

Prior to removing the oven door, prepare a surface where

you will place it. This surface should be flat and covered

with a soft blanket, or use the corner posts from your

packaging material.

2.

Fully open the oven door.

3.

Locate the oven door hinge locks in both corners of the

oven door, and rotate the hinge locks toward the oven door

to the unlocked position. If the door hinge lock is not rotated

fully (see illustration B), the door will not remove properly.

Locked

position

Grip here

to rotate

Unlocked

position

A. Oven door hinge lock in

locked position

B. Oven door hinge lock in

partially unlocked position

4.

Gently start to close the door. The door will stop at a partially

closed position.

5.

Using two hands, grasp the edges of the oven door. Close

the oven door slightly past the stop position to take the

weight off of the door hinges, and then pull the oven door up.

6.

Pull the oven door toward you, and then remove. You may

need to gently shift door from side to side as you pull.

7.

Set the oven door aside on the prepared covered work

surface with the oven door resting on its handle.

8.

To continue with the oven installation, go to the

“Positioning Oven Feet” section.

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven.
Failure to do so can result in back or other injury.

Door

Hinges

Advertising