Epson C82362 - Manual (Page 102)

4-4 Using the Interface Card with Macintosh
R4C3610 Adm/G
Rev. C
A5 size CHAP4.FM
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Entity Type:
If you are using a Level 1 printer, set the Entity type to match
the driver for the printer with the interface card. The default
is "epson". Click the Entity configuration button to enter the
entity type (up to 32 characters).
If you are using a Level 2 or 3 printer, you do not have to set
this option. The list view displays the printer’s Entity type on
an AppleTalk network.
Zone Name:
Select the network zone in which you want the printer to
appear.
Network Number Set:
Select either Auto or Manual. Auto is usually the preferred
setting.
Network Number for Manual Mode:
Type a value between 0 and 65534 when Network Number
Set is Manual.
6. After making settings, click Send.
The Password dialog box appears.
7. Enter your password (up to 20 characters) and click OK to
save settings. If you are entering a password for the first time,
click Change and set the password. For more information
about passwords, see “About passwords” on page 9-16.
After updating is complete, refresh the configuration. To do
this, quit EpsonNet MacAssist, and open it again.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
Internal Print Server, you must wait to turn off your printer
until after the on-screen message appears.