Epson C82362 - Manual (Page 91)

3
Using the Interface Card with NetWare 3-41
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
R Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Configuring the Interface Card Using EpsonNet
WebAssist
You can configure the interface card for NetWare using EpsonNet
WebAssist.
Note:
❏ You cannot create a print server, print queue, or printer with
EpsonNet WebAssist. You must have created these objects before
using EpsonNet WebAssist.
❏ A web browser must be installed in your computer.
❏ TCP/IP must be correctly set for the computer and interface card.
❏ Do not operate EpsonNet WinAssist/MacAssist and EpsonNet
WebAssist for the printer at the same time.
❏ There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS manual.
1. Turn on the printer with the interface card.
2. Run EpsonNet WebAssist using either of the methods
described below.
❏ Run EpsonNet WinAssist or EpsonNet MacAssist. Click
the printer you want to configure from the list and click
the Launch Browser button.
❏ Open your browser, and type in the IP address of the
interface card directly. Do not run EpsonNet WinAssist
or MacAssist.
URL: http:// the IP address of the interface card/
3. EpsonNet WebAssist starts.