Epson C82362 - Manual (Page 202)

11-6 EPSON Status Monitor 2 (Windows only)
R4C3610 Adm/G
Rev. C
A5 size CHAP11.FM
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
NetWare printer
You can use the network printer though the NetWare server.
Make sure the following points;
❏ Connect the printer to a Bindery queue or NDS queue in
Windows 98/95, Windows NT 4.0, or Windows NT 3.51.
❏ Use IntranetWare Client32 Ver1.12 or later for Windows 95.
Use IntranetWare Client for Windows NT. Use the latest
Novell Client for Windows 98.
❏ See the EPSON Status Monitor 2 README file for more
information about NDS support.
❏ You must set the port number to 0 when using Remote Printer
mode.
If you use your printer in a NetWare environment, you need to
connect to the print queue that is assigned to your printer before
installing EPSON Status Monitor 2. For an explanation of
NetWare printer protocols, see your NetWare documentation.
1. Click Start, point to Settings, and click Printers.
2. Click Add Printer.
3. Select Network printer, and click Next.
4. Double-click the NetWare file server that services the print
queue assigned to your printer.
5. All of the queues serviced by that file server appear in a list.
Select the correct print queue, and click OK. (If the printer
driver is not installed, a dialog box appears prompting you to
select the printer driver.)
6. Make the default printer setting and click Next.
7. Click Finish.