Epson C82362 - Manual (Page 18)

8 Introduction
L R4C3610 Adm/G
Rev. C
A5 size INTRO.FM
8/4/00 Pass 0
Proof Sign-off:
KOW M.Arai K.Nishi
K.Nishi
J.Hoadley
Brief Overview of Configuring the Interface Card
To configure the interface card you must complete the following
steps. See the noted documentation for more detailed
information.
1. Install the interface card in your printer. See Chapter 1 or your
printer documentation.
2. Install EpsonNet WinAssist or MacAssist. See the
supplemental sheet included with the CD-ROM.
3. Install the TCP/IP protocol in your operating system when
printing with TCP/IP or when using EpsonNet WebAssist for
configuration. Then set the IP address for the interface card.
See Chapter 2 for instructions on installing TCP/IP and
setting the IP address.
4. Install Microsoft Internet Explorer or Netscape Navigator to
use EpsonNet WebAssist. See your browser documentation.
5. Configure the interface card using EpsonNet WinAssist,
MacAssist, or WebAssist and set up the printer. See the
appropriate chapter for your network environment.
6. Use EpsonNet Direct Print to print from TCP/IP. See Chapter
10.
7. Use EPSON Status Monitor 2 to monitor printer status. See
Chapter 11.
8. Use EpsonNet Internet Print to print using the Internet
Printing Protocol (IPP). See Chapter 12.
9. Use Printer Status Page to monitor printer status through the
Internet. See Chapter 13.