Epson C82362 User Manual
Page 42
2-14
Setting the IP Address
R4C3610 Adm/G
Rev. C
A5 size
CHAP2.FM
8/4/00
Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
5. Click the TCP/IP tab to display the TCP/IP menu.
Note:
The network administrator must confirm any changes made to the
IP address settings.
6. Select the "Get IP address" method from the following list:
Auto, DHCP, BOOTP, RARP, or Manual.
Note:
❏ The default is Auto. When Auto is selected, DHCP, BOOTP,
and RARP are available.
❏ To use RARP, BOOTP, or DHCP, a server for each protocol is
necessary. If there is no server which corresponds to the
protocol, do not use it. See your server documentation for
setting details.
❏ If there are no DHCP, BOOTP, or RARP servers on your
system or on your network, the interface card uses
"192.168.192.168" as the default IP address.