Epson C82362 - Manual (Page 138)

6-20 Using the Interface Card with Windows 2000/NT
R4C3610 Adm/G
Rev. C
A5 size CHAP6.FM
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Windows NT 3.51
1. Double-click Print Manager from the Main dialog box, and
select Connect to Printer from the Printer menu.
2. Select the printer you want to configure from the Shared
Printers list and click OK. If you cannot select the printer, enter
the following in the Printer box:
\\(NetBIOS name of the interface card) \
(Device name of the interface card)
3. Follow the on-screen instructions to set up the printer.
Using the NET USE command
If you are using a Windows 2000 and NT server and using
NetBEUI to connect with the interface card, we recommend that
you use the NET USE command, as outlined below:
1. Check that the following services are installed.
For Windows 2000:
Double-click Network and Dial-up Connections in Control
Panels and right-click the Local Area Connections icon and
select Properties. Check that Client for Microsoft Networks
is in the Components list.
For Windows NT 4.0:
Double-click Network in Control Panels and check that
Server or Workstation is listed in the Services menu.
For Windows NT 3.51:
Double-click Network in Control Panels and check that
Server or Workstation is listed in the Installed Network
Software list.