Epson C82362 - Manual (Page 71)

3
Using the Interface Card with NetWare 3-21
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
R Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
2. From any NetWare client, log in to the server as a
SUPERVISOR. Make sure to log in with Bindery connection.
Note:
If the client using this setting has logged in using NDS mode, press
the F4 key while PCONSOLE switches to the bindery mode.
3. Run PCONSOLE. From the Available Options screen, select
Print Queues and press Enter. Press Insert and type the print
queue name. Then press Enter.
Note:
Since your clients need the print queue to use the printer, announce
the print queue name to your clients.
4. From the Print Queue list, select the print queue name that
you just typed and press Enter. From the Print Queue
Information list, select Queue Users and press Enter. Next,
select EVERYONE from the list. If EVERYONE is not in the list,
press Insert and select EVERYONE from the queue user list.
5. From the Available Options screen, select Print Servers and
press Enter. Press Insert and type the print server name. Then
press Enter.
6. Press Esc to exit PCONSOLE, and log out from the server.
7. Log in to the server as an ADMIN. Be sure to log in with NDS
connection.
8. Start Nwadmin.
9. To create the Printer Object, click the container specified as
the Bindery context and select Create from the Object menu,
then Printer. Type the printer name and click Create.
10. To assign the print queue, double-click the Printer object icon
(created in step 9). The Printer dialog box appears.