Epson C82362 - Manual (Page 174)

9-16 The EpsonNet Configuration Utility
R4C3610 Adm/G
Rev. C
A5 size CHAP9.FM
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Launch Browser button:
Select the printer you want to configure, and then click the
Launch Browser button. EpsonNet WebAssist will start to
configure the interface card. EpsonNet MacAssist
automatically closes when the browser launches.
Configuration button:
Select the printer you want to configure, and click this button
to configure the interface card using EpsonNet MacAssist.
Quit button:
Exits EpsonNet MacAssist.
Setting menus
About passwords
The password is required to configure an interface card. When
you click OK in the setting dialog box or click the Return to
default button, the Password dialog box appears.
1. To set the password or when you want to change the current
password, click Change.
2. In the Administrator password dialog box, enter a password
(up to 20 characters) and click OK. Passwords are case
sensitive.
Note:
❏ The password is used for EpsonNet WinAssist, MacAssist, and
WebAssist.
❏ Since a new password will be effective after sending the data to
the interface card, enter the old password right after changing
the password.