Epson C82362 - Manual (Page 167)

9
The EpsonNet Configuration Utility 9-9
R4C3610 Adm/G
Rev. C
A5 size CHAP9.FM
8/4/00 Pass 0
R Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
TCP/IP menu
You can configure the interface card for TCP/IP by making the
necessary settings on the TCP/IP menu. See Chapter 2 for details.
Items Explanations
Get IP address Select the method for acquiring IP addresses; Auto,
DHCP, BOOTP, RARP, or Manual.
Set by PING Check this box to enable IP address setting using
the ping command. This check box is available
only when Manual is selected for Get IP address.
IP address Set the IP address for the interface card. Be sure
that the IP address is unique and will not cause
conflicts with any other device on the network.
Subnet mask Set the subnet mask of the IP address.
Default gateway Set the gateway address.
OK Updates the settings.
Cancel Cancels any changes.
Help Accesses help.