Epson C82362 - Manual (Page 124)

6-6 Using the Interface Card with Windows 2000/NT
R4C3610 Adm/G
Rev. C
A5 size CHAP6.FM
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Printing via LPR port in Windows NT 3.51
When using the printer on a TCP/IP network in Windows
NT 3.51, follow the steps below to connect the network printer to
your computer using the LPR port.
Setting up your printer
Note:
You must install the correct printer drivers before starting.
1. Make sure the printer is turned on.
2. Select Create Printer from the Printer menu of the Print
Manager.
3. Enter the printer name, and select the printer driver.
4. If you want to use the printer on a network, select the Share
this printer on the network check box, and enter the Share
Name and the Location.
Share Name:
Enter the shared printer name.
Location: Since it is treated as a comment, you don’t have to
enter a location.
5. Select Other from the Print to pull-down menu.