Epson C82362 User Manual
Page 86
3-36
Using the Interface Card with NetWare
R4C3610 Adm/G
Rev. C
A5 size
Chap3.fm
8/4/00
Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Configuring the interface card using EpsonNet WinAssist
Follow the steps below if the printer is a Remote (rprinter on IPX)
connection.
Note:
❏ The following configuration is not necessary if the printer is a
Remote (LPR on IP) connection or Forward jobs to a Queue
connection.
❏ Be sure that the one of the following Client is installed in your
computer; Novell Client 32, Novell IntranetWare Client, or Novell
Client.
1. Turn on the printer with the interface card.
2. From any NetWare client, log in to the target NetWare server
as an ADMIN.
3. Run EpsonNet WinAssist from the Start menu.
4. Click IPX. Select the printer you want to configure from the
list, then click Configuration.