The filter and hvac store, Fcp carbon pleat – Honeywell 11255 User Manual

Page 101

Advertising
background image

101

FCP Carbon Pleat

Activated Carbon Adsorbers

Models FCP*xxxxx

(Where * indicates carbon type model of

201, 202, 204, 301, 302, 304. See price book.)

This table illustrates

the differences in
overall capacity of
three carbon prod-
ucts.

Capacity to

Product

75% Breakthrough

Carbon Slurry

1.6 grams

FCP 200 Series

25 grams

FCP 300 Series

63 grams

FCP Series – Activated Carbon Filled
Nonwoven Media Adsorbers

The Flanders FCP Series adsorbers are designed
for removal of malodorous compounds at low con-
centration levels. Utilizing the latest technology in
fine mesh activated carbon, the product provides
high removal efficiency of nuisance odors.

Product Design

FCP Series filters are pleated activated carbon
filled nonwoven media sealed within a moisture
resistant beverage board frame. The uniqueness of
the product is the filter media. The polyester media
is filled with fine mesh activated carbon through the
depth of the media. The ultrapure carbon is ther-
mally bonded to the polyester fibers providing supe-
rior product design and offering the following
advantages.

• Maximum Carbon Surface Area

- Optimizes Efficiency and Available Capacity

• Exceptional Adhesion of Granules

- Precludes Carbon Dusting

• Consistent Carbon Distribution

- Reduces Channeling

• Minimizes Pressure Loss

FCP Performance

The FCP products offer exceptional performance in
efficiency and capacity compared with products
manufactured from carbon slurry media or car-
bon/polyester pads. Figure 1 on the reverse side
illustrates that the FCP efficiency is at least 30%
better than a carbon slurry pleat. The minimum
capacity is six times greater as shown in the table
below.

Options

The FCP Series is available in standard capacity
and high capacity models in 2” and 4” depths.

200 Series - Standard Capacity

The filter media has a carbon mass loading of 7 oz.
per sq. yd. of material.

300 Series - High Capacity

The filter media has a carbon mass loading of 14
oz. per sq. yd. of material.

The FCP Series is available with three contaminant
specific activated carbon products.

201 or 301 - Removal of VOC’s

202 or 302 - Removal of Acid Gases

204 or 304 - Removal of Alkaline

Gases

Flanders - Foremost in Air Filtration

Corporate Headquarters, St. Petersburg, FL

the filter and hvac store

Advertising