Honeywell 11255 - Manual (Page 19)

19
Series 331Y PA
Models 331Y-xxx
22 gram Fiberglass Paint Arrestor for use in all
booth types. Series 331Y is a high quality fiberglass
media. Made with 22 grams of fiberglass per
square foot, the Series 331Y is more efficient and
holds more paint than many other fiberglass prod-
ucts. It comes in 200 ft. rolls and is also available in
pads for crossdraft and semi-downdraft booths.
Series 331Y is made from air-laid fiberglass form-
ing a 2.5” thickness. The exit side has a skin back-
ing for added efficiency.
Series 331Y fibers are ideal for paint capture due to
their loose weave. The paint particles collide with
the fiberglass fibers and are removed from the
airstream.
If your downdraft booth uses a pit, measure the
width of the pit to find the appropriate roll, or check
our booth guide. To change the media, simply,
unwind the roll to the proper length, and cut a pad.
Series 330G PA
Models 330G-xxx
15 gram Fiberglass Paint Arrestor for all booth
types. Series 330G is our economy grade fiber-
glass media. Made with 15 grams of fiberglass per
square foot, the Series 330G holds more paint than
other economy fiberglass media due to its skin exit
side.
Series 330G comes in 100 ft. rolls compared to
many of our competitors 200-300 ft. rolls. The fiber-
glass is also available in pads for crossdraft and
semi-downdraft booths.
Series 330G is made from air-laid fiberglass form-
ing a 2.5” thickness. The exit side has a skin back-
ing for added efficiency.
Series 330G fibers are ideal for paint capture due to
their loose weave. The paint particles collide with
the fiberglass fibers and are removed from the
airstream.
If your downdraft booth uses a pit, measure the
width of the pit to find the appropriate roll, or check
our booth guide. To change the media, simply,
unwind the roll to the proper length, and cut a pad.
Series 225T Cube
Models CUBx225Txxxxxx
2-Ply Self Supportive Cube Filter for use as a paint
arrestor. 225T Cube filters are a single pocket
trapezoid cube filter. A 1” dual denier polyester
media is sewn into shape. The filter is then
attached to a 9 gauge wire for support when
installed in the filter housing.
Due to their unique design, cube filters have a larg-
er surface area than conventional pads. The
increase in surface area allows the filter to hold
more contaminants thereby increasing the life of
the filter.
325Tand 425T-Cubes
Models CUBx325Txxxxxx and CUBx425Txxxx
Three and Four Stage Cube Filters for use as a
paint arrestor. Two products make up our premium
exhaust cube product line. They are the Series
Flanders - Foremost in Air Filtration
Corporate Headquarters, St. Petersburg, FL
the filter and hvac store