Honeywell 11255 - Manual (Page 15)

15
Series ST55-Polyester Panel
Models ST55R-xxxx Ring Panel and ST55L-xxxx Link
Two-ply 1” nominal media construction using a 1/2” nominal white poly-
ester on the upstream, followed by a 1/2” nominal green super tackified
polyester downstream.
Flanders - Foremost in Air Filtration
Corporate Headquarters, St. Petersburg, FL
Link Panels are heat-
sealed together.
Use link panels for easy
installation in filter
tracks and eliminate air
bypass!
Link panels make installation
easy. Just unfold the filter
and slide it into the track as
one continuous, long filter.
When time to replace it, the
whole filter comes out easily
in one piece. Plus, the seal-
ing between links and the
generous selvedge elimi-
nates air bypass.
Goes in as one
piece. Comes out
as one piece.
Overcut gaskets
against air
bypass.
Moisture
resistant
materials
Series 425T-Polyester Panel or Cubes
Models 425RT-xxxx Ring Panels and 425LT-xxxx Links
CUBx425T-xxxxxx Cube
Four-ply 1-3/4”” nominal media construction, using a 1-1/2” nominal
white/green/white tridensity, multidenier polyester upstream,with internal
tackification followed by a 1/4” dense white polyester downstream.
Series 325T-Polyester Panel or Cubes
Models 325RT-xxxx Ring Panels and 325LT-xxxx Links
CUBx325T-xxxxxx Cube
Three-ply 1-3/4”” nominal media construction, using a 1-1/2” nominal
white/green dual density, multidenier polyester upstream, with internal
tackification followed by a 1/4” dense white polyester downstream.
Series 225T-Polyester Panel or Cubes
Models 225RT-xxxx Ring Panel, 225LT-xxxx Link,
CUBx225T-xxxxxx Cube
Two-ply 1” nominal media construction, using a 3/4” nominal white poly-
ester on the up-stream, with internal tackification followed by a 1/4”
dense white polyester downstream.
the filter and hvac store