Honeywell 11255 - Manual (Page 107)

107
Superflow-VC
Disposable Carbon Adsorber
Models SFVC*-xxxxxx
(Where * indicates carbon type: 201, 202, 204, 205 or 209.
See Price book.)
Features and Benefits
• Total detention multi-panel design combines high adsorption effi-
ciency with low pressure drop
• Entire cell is disposable so installation is clean, quick and easy
• Installation flexibility: adsorbers are suitable for both initial and
retrofit applications and in front or side access arrangements.
• Gaseous contamination control can be applied to most HVAC air
systems
• Impregnated carbons are available for control of difficult contami-
nants: H2S, acid gases, formaldehyde, ammonia, aldehydes and
amines
General
Flanders Superflow-VC Disposable Activated
Carbon Adsorbers are designed for gaseous con-
tamination control in both new and existing HVAC
systems. Superflow-VC Adsorbers have total-
detention capability with all air passing through the
carbon beds. These adsorbers can help mitigate
Indoor Air Quality problems in buildings where the
air must be cleansed of gaseous contaminants.
They are also useful in a variety of other applica-
tions such as the protection of light industrial
processes and works of art.
Construction
Superflow-VC Adsorbers consist of eight activated
carbon-filled panels arranged in a V configuration
and sealed with non-volatile adhesive into top and
bottom injection molded ABS plastic end plates.
The sealant completely eliminates bypass within
the cell. The end plates incorporate a single head-
er to position the cell in holding frames or side
access housings.
Extruded aluminum vertical struts close off the
panel edges in front and are aerodynamically
designed to minimize airflow restriction and turbu-
lence. Vertical steel rods on the downstream side
provide rigidity and minimize twisting and racking.
The activated carbon panels are constructed of
one” (25 mm) thick moisture-resistant corrugated
kraft honeycomb grids. The honeycomb is filled
with granular activated carbon held in place by fine
mesh nylon screens glued to the grid. The screens
act as a secondary prefilter and also as an afterfil-
ter. The activated carbon media is premium HVAC
grade virgin coconut shell granules with a minimum
carbon tetrachloride (CTC) activity of 60% per
ASTM D-3467. Granules are 4 x 8 US mesh size
with a minimum apparent density of 0.49 g/mL. The
minimum hardness is 97 per ASTM D-3802 and the
minimum surface area is 1100 m2/g by the N2 BET
test method.
Physical Data
Top and bottom end plates: High strength ABS plas-
tic
Vertical struts: Aerodynamically-designed extruded
aluminum
Vertical supports: Steel rods on downstream side
Carbon panels: Eight one inch (25 mm) moisture
resistant corrugated kraft honeycomb grids filled
with granular activated carbon media contained by
fine mesh nylon screens on both air entering and
leaving sides
Panel sealant: Non-volatile type applied along the
entire periphery of the panel to eliminate air by-
pass
Activated carbon media: Virgin coconut shell base,
4 x 8 US mesh size, minimum 60% CTC activity
Operating limits: 150°F (65°C) and 95% RH, non-
condensing
the filter and hvac store