Honeywell DCP552 Mark II - Manual (Page 91)

6-9
Chapter 6. OPERATION
■ Constant value control mode
● DISP key function (when variable parameter PA03 is set to 0)
The DISP key is used to cycle through the displays in the following order: Display
E1, display E2, display E3, display E1.
● Display E1
● Display E2
● Display E3
In MANUAL mode, the number of digits available for output values flash.
OUT
PV
PROG SEG
PROFILE
PV
Output value (%)
DEV
PV
PROG SEG
PROFILE
PV
Deviation
PV
SP
PROG SEG
PROFILE
PV
SP