Warning, Appliance setup – Heatiator Heatilator GB4336 User Manual

Page 25

Advertising
background image

Heatilator • GB4336/GB4992 • 4003-085 Rev H • 04/06

25

A. Remove the Shipping Materials

Remove shipping materials from inside or underneath the
fi rebox.

Shock Risk
Fire Risk

Use ONLY optional accessories approved
for this appliance.
• Using non-listed accessories voids

warranty.

• Using non-listed accessories may result

in a safety hazard.

• Only Hearth & Home Technologies

approved accessories may be used
safely.

WARNING

Explosion Risk
• Follow rockwool placement instructions

in this manual.

• Do NOT place rockwool directly over

burner ports.

• Replace rockwool material annually.

Improperly placed rockwool interferes with
proper burner operation.

WARNING

12

12

Appliance Setup

B. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated in-
side the fi rebox or underneath in the control cavity.

C. Accessories

Install approved accessories (refer to Section 16) per in-
structions included with accessories.

D. Install the Refractory

Install refractory per instructions included with kit.

E. Lava Rock, Vermiculite, Rockwool Placement

Placing the Lava Rock and Vermiculite

• Place lava rock on top of the lava rock tray in front of and

under the burner. See Figure 12.1.

Sprinkle vermiculite evenly over area covered by lava rock.
See Figure 12.2.

• It is not necessary to use entire bag of lava rock or

vermiculite.

Placing the Rockwool

• Place 1/2 in. pieces of rockwool under front logs and on

bottom hearth log.

Place rockwool the full length of the burner., but not packed
against it. See Figure 12.3.

• It is not necessary to use all the rockwool.

Figure 12.1 Placement of Lava Rock

Figure 12.2 Placement of Vermiculite

Figure 12.3 Placement of Rockwool

Advertising