Heatiator Heatilator GB4336 - Manual (Page 8)

8 Heatilator • GB4336/GB4992 • 4003-085 Rev H • 04/06
Note:
• Illustrations refl ect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
Fire Risk
Provide adequate clearance:
• Around air openings.
• For service access.
Locate appliance away from traffi c areas.
WARNING
A. Select Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (See Figure 3.1).
N o t e : For ac tual applianc e dimensions refer to
Section 16.
In addition to these framing dimensions, also reference the
following sections:
• Clearances and Mantel Projections (Sections 3.C. and 3.D.)
• Vent Clearances and Framing (Section 6)
A
A
A
C
B
B
1/2 in. (13 mm) min.
appliance
to combustibles
Alcove
Installation
C
Drywall
48 in.
(1219 mm)
max.
Figure 3.1 Appliance Locations
3 3
Framing and Clearances
Model # A B C
4336 Series
in. 43 51-3/4 24
mm 1092 1314 610
4942 Series
in. 49 56 24
mm 1245 1422 610