Honeywell Local Operator Interface S7999B - Manual (Page 34)

S7999B, S7999C SOLA LOCAL OPERATOR INTERFACE
65-0303—05 34
Fig. 63. Reset R7910A or R7911.
When the user has pressed the Reset button on the control,
completing verification procedure, a Verification Complete
screen is displayed, as shown in as shown in Fig. 64.
Fig. 64. Safety parameter configuration complete.
If for some reason the user does not press the Reset button on
the control within 30 seconds, the configuration is cancelled,
as shown in Fig. 65.
Fig. 65. Control reset timed out.