Fusion F300S - Manual (Page 34)

34 F300S/F300SQ Ultraviolet Lamp System
Lamps Mounted in Opposing Configuration
Figure 6. Lamps in Opposing Configuration
UV Light Shielding
Adequate light shielding must be provided for each irradiator in the system. If
shielding is not used, or if UV light escapes around the irradiator support, the operator
must wear a welder’s helmet or UV blocking eye wear. Long sleeved clothing is
required to protect the skin from the effects of UV light.
IMPORTANT: If two lamps are to be mounted
opposing each other (as shown in Figure 6 on
page 34 ), lamp performance and operation
may be impaired. Contact Fusion UV Systems
Technical service department for consultation.