Document Outline

• Table of Contents
  • 1 Before You Start 1
    • 1.1 Symbols Used 1
    • 1.2 Safety Information 2
      • 1.2.1 Warnings 2
      • 1.2.2 Cautions 3
    • 1.3 Authorized Service Centers 4
  • 2 Introduction 7
  • 3 Specifications and Environmental Conditions 9
    • 3.1 Specifications 9
    • 3.2 Environmental Conditions 10
  • 4 Quick Start 11
    • 4.1 Unpacking 11
    • 4.2 Use Proper Care 11
    • 4.3 Learn About the Features and Components 11
    • 4.4 Connect the Probe 11
      • 4.4.1 Using the Clamp-on Ferrites 12
    • 4.5 Connect the Power Source 12
    • 4.6 Switch the Power On 12
    • 4.7 Measure Temperature 13
  • 5 Parts and Controls 15
    • 5.1 Front Panel Buttons 15
    • 5.2 Back Panel 17
    • 5.3 Accessories 17
  • 6 General Operation 19
    • 6.1 Display 19
    • 6.2 Changing Units 19
    • 6.3 Battery 19
    • 6.4 Probe Input Modules 20
      • 6.4.1 Connecting a PRT or Thermistor Probe 21
      • 6.4.2 Connecting a Thermocouple 21
    • 6.5 DC Power Source 23
    • 6.6 Power On Self-Test 23
    • 6.7 Display Backlight and Contrast 23
    • 6.8 Taking Measurements 23
      • 6.8.1 Connecting the Sensor 23
      • 6.8.2 Enabling the Channel 24
      • 6.8.3 Selecting Conversion Type and Probe Characterization 24
    • 6.9 Fast Measurement Mode 24
    • 6.10 Data Logging 25
  • 7 Menu Functions 27
    • 7.1 Channel Menu 27
      • 7.1.1 Measure Period and Fast Measurement Mode 28
      • 7.1.2 Enable Channel 30
      • 7.1.3 Channel Mode 31
      • 7.1.4 Moving Average 31
      • 7.1.5 Display Options/Auto-Cal 32
    • 7.2 Probe Menu 33
      • 7.2.1 Edit Probe 34
        • 7.2.1.1 ITS-90 Conversion 36
        • 7.2.1.2 ITS-SR5 37
        • 7.2.1.3 PT-100 Conversion 38
        • 7.2.1.4 Callendar-Van Dusen (CVD) conversion 38
        • 7.2.1.5 RES Conversion 39
        • 7.2.1.6 Thermistor T(R) Conversion [THERM-T] 39
        • 7.2.1.7 Thermistor R(T) Conversion [THERM-R] 40
        • 7.2.1.8 YSI-400 Conversion 40
        • 7.2.1.9 Thermocouple Volts [Vin[mV]] 40
        • 7.2.1.10 Standard Thermocouple Conversions 41
        • 7.2.1.11 Thermocouple Polynomial Conversion 41
      • 7.2.2 Copy Probe 42
      • 7.2.3 Test Probe 43
      • 7.2.4 Print Probe 43
      • 7.2.5 Default Probe 44
    • 7.3 Fields Menu 45
      • 7.3.1 Clear Stats 46
      • 7.3.2 Select Fields 47
      • 7.3.3 Edit Fields 49
      • 7.3.4 Default Fields 49
      • 7.3.5 Display Options 50
    • 7.4 Logging Menu 51
      • 7.4.1 Demand Log 52
        • 7.4.1.1 Store Reading 53
        • 7.4.1.2 Log History 54
        • 7.4.1.3 View Data 55
        • 7.4.1.4 Print Data 56
        • 7.4.1.5 Delete Data 57
      • 7.4.2 Auto Log 58
        • 7.4.2.1 Logging Options 59
        • 7.4.2.2 Start Stop 60
        • 7.4.2.3 View Data 62
        • 7.4.2.4 Print Data 63
        • 7.4.2.5 Delete Data 63
      • 7.4.3 Log Stats 64
      • 7.4.4 Data Labels 65
      • 7.4.5 Default Labels 66
    • 7.5 System Menu 67
      • 7.5.1 Comm Setup 68
        • 7.5.1.1 Serial 69
        • 7.5.1.2 GPIB (Optional) 70
      • 7.5.2 Date Time 70
      • 7.5.3 Password 71
      • 7.5.4 Calibration 73
      • 7.5.5 System Reset 75
  • 8 Digital Communications Interface 77
    • 8.1 Overview 77
    • 8.2 Communications 77
      • 8.2.1 Serial Wiring 77
      • 8.2.2 GPIB Communications 78
        • 8.2.2.1 Capability 78
        • 8.2.2.2 Connection 78
        • 8.2.2.3 Device Setup 78
    • 8.3 Interface Commands 78
      • 8.3.1 Command Summary 78
      • 8.3.2 Command Syntax 83
    • 8.4 Commands 84
      • 8.4.1 Measurement Commands 86
        • 8.4.1.1 CALCulate:AVERage:CLEar 86
        • 8.4.1.2 CALCulate<chn>:AVERage<n>:DATA? 86
        • 8.4.1.3 CALCulate:AVERage<n>:TYPE? 86
        • 8.4.1.4 FETCh? [<chn>] 87
        • 8.4.1.5 FORMat:STAMp? 88
        • 8.4.1.6 FORMat:STAMp <bool> 88
        • 8.4.1.7 MEASure? [<chn>] 88
        • 8.4.1.8 READ? [<chn>] 88
        • 8.4.1.9 SENSe<chn>:DATA? 88
      • 8.4.2 Measurement Control Commands 88
        • 8.4.2.1 INITiate 89
        • 8.4.2.2 INITiate:CONTinuous? 89
        • 8.4.2.3 SENSe:AVERage:COUNt? [MIN|MAX|DEF] 89
        • 8.4.2.4 SENSe:AVERage:COUNt <num>|MIN|MAX|DEF 89
        • 8.4.2.5 SENSe<chn>:RESistance:RANGe? [MIN|MAX|DEF] 89
        • 8.4.2.6 SENSe<chn>:RESistance:RANGe <num>|MIN|MAX|DEF 90
        • 8.4.2.7 SENSe<chn>:RESistance:WIRE? [MIN|MAX|DEF] 90
        • 8.4.2.8 SENSe<chn>:RESistance:WIRE <num>|MIN|MAX|DEF 90
        • 8.4.2.9 TRIGger:TIMer? [MIN|MAX|DEF] 91
        • 8.4.2.10 TRIGger:TIMer <num>|MIN|MAX|DEF 91
      • 8.4.3 Channel Commands 91
        • 8.4.3.1 ROUTe:CLOSe? <chn> 91
        • 8.4.3.2 ROUTe:CLOSe <chn> 92
        • 8.4.3.3 ROUTe:OPEN? <chn> 92
        • 8.4.3.4 ROUTe:OPEN <chn> 92
        • 8.4.3.5 ROUTe:SCAN? 92
        • 8.4.3.6 ROUTe:SCAN <chn list> 92
        • 8.4.3.7 ROUTe:SCAN:MODE? [MIN|MAX|DEF] 92
        • 8.4.3.8 ROUTe:SCAN:MODE <num>|MIN|MAX|DEF 93
      • 8.4.4 Probe Commands 93
        • 8.4.4.1 CALCulate<chn>:CONVert:CATalog? 93
        • 8.4.4.2 CALCulate<chn>:CONVert:COPY <dest chn>|ALL 93
        • 8.4.4.3 CALCulate<chn>:CONVert:NAMe? 94
        • 8.4.4.4 CALCulate<chn>:CONVert:NAMe <conv> 94
        • 8.4.4.5 CALCulate<chn>:CONVert:PARameter:CATalog? 94
        • 8.4.4.6 CALCulate<chn>:CONVert:PARameter:VALue? [<param>|ALL] 95
        • 8.4.4.7 CALCulate<chn>:CONVert:PARameter:VALue <param>,<num>[,< param>,<num>...] 95
        • 8.4.4.8 CALCulate:CONVert:PRINt [<chn>|ALL [,<port>]] 95
        • 8.4.4.9 CALCulate<chn>:CONVert:SNUMber? 96
        • 8.4.4.10 CALCulate<chn>:CONVert:SNUMber <serl> 96
        • 8.4.4.11 CALCulate<chn>:CONVert:TEST? <res>|<volt> 96
      • 8.4.5 Calibration Coefficient Commands 97
        • 8.4.5.1 CALibrate:AUTo 97
        • 8.4.5.2 CALibrate<chn>:DATE:CALibrate? [MIN|MAX|DEF] 97
        • 8.4.5.3 CALibrate<chn>:DATE:CALibrate (<year>,<month>,<day>)|MIN|MAX|DEF 97
        • 8.4.5.4 CALibrate<chn>:DATE:DUE? [MIN|MAX|DEF] 97
        • 8.4.5.5 CALibrate<chn>:DATE:DUE (<year>,<month>,<day>)|MIN|MAX|DEF 98
        • 8.4.5.6 CALibrate<chn>:PARameter:OFFSet<n>? [MIN|MAX|DEF] 98
        • 8.4.5.7 CALibrate<chn>:PARameter:OFFSet<n> <num>|MIN|MAX|DEF 99
        • 8.4.5.8 CALibrate<chn>:PARameter:SCALe<n>? [MIN|MAX|DEF] 99
        • 8.4.5.9 CALibrate<chn>:PARameter:SCALe<n> <num>|MIN|MAX|DEF 99
        • 8.4.5.10 CALibrate<chn>:PARameter:LINearity<n>? [MIN|MAX|DEF] 100
        • 8.4.5.11 CALibrate<chn>: PARameter:LINearity<n> <num>|MIN|MAX|DEF 100
        • 8.4.5.12 CALibrate<chn>:PARameter:RJC? [MIN|MAX|DEF] 101
        • 8.4.5.13 CALibrate<chn>:PARameter:RJC <num>|MIN|MAX|DEF 101
      • 8.4.6 Display Commands 101
        • 8.4.6.1 DISPlay:RESolution? [MIN|MAX|DEF] 101
        • 8.4.6.2 DISPlay:RESolution <num>|AUT|MIN|MAX|DEF 101
        • 8.4.6.3 DISPlay:LAMP? [MIN|MAX|DEF] 102
        • 8.4.6.4 DISPlay:LAMP <bool>|<num>|MIN|MAX|DEF 102
        • 8.4.6.5 DISPlay:DECimal:FORMat? [MIN|MAX|DEF] 102
        • 8.4.6.6 DISPlay:DECimal:FORMat <num>|MIN|MAX|DEF 102
        • 8.4.6.7 DISPlay:WINDow? [MIN|MAX|DEF] 103
        • 8.4.6.8 DISPlay:WINDow <num>|MIN|MAX|DEF 103
        • 8.4.6.9 DISPlay:WINDow<n>:FIELd<n>:FEED? 103
        • 8.4.6.10 DISPlay:WINDow<n>:FIELd<n>:FEED <chn>[,<num>] 103
      • 8.4.7 Logging Commands 103
        • 8.4.7.1 LOGging:AUTomatic:DELete [<num>|ALL] 103
        • 8.4.7.2 LOGging:AUTomatic:COUNt? [MIN|MAX|DEF] 104
        • 8.4.7.3 LOGging:AUTomatic:COUNt <num>|MIN|MAX|DEF 104
        • 8.4.7.4 LOGging:AUTomatic:FREE? 104
        • 8.4.7.5 LOGging:AUTomatic:LABel? [MIN|MAX|DEF] 104
        • 8.4.7.6 LOGging:AUTomatic:LABel <num>|MIN|MAX|DEF 105
        • 8.4.7.7 LOGging:AUTomatic:POINt? [MAX] 105
        • 8.4.7.8 LOGging:AUTomatic:PRINt [<num>|ALL [,<port>]] 105
        • 8.4.7.9 LOGging:AUTomatic:STATus? 105
        • 8.4.7.10 LOGging:AUTomatic:STATus <bool> 106
        • 8.4.7.11 LOGging:AUTomatic:TIMe? [MIN|MAX|DEF] 106
        • 8.4.7.12 LOGging:AUTomatic:TIMe <num>|MIN|MAX|DEF 106
        • 8.4.7.13 LOGging:AUTomatic:VALue? <num>|MIN|MAX|DEF 106
        • 8.4.7.14 LOGging:DEMand:DELete [<num>|ALL] 107
        • 8.4.7.15 LOGging:DEMand:FREE? 107
        • 8.4.7.16 LOGging:DEMand:LABel? [MIN|MAX|DEF] 107
        • 8.4.7.17 LOGging:DEMand:LABel <num>|MIN|MAX|DEF 107
        • 8.4.7.18 LOGging:DEMand:POINt? 107
        • 8.4.7.19 LOGging:DEMand:PRINt [<num>|ALL [,<port>]] 108
        • 8.4.7.20 LOGging:DEMand:STORe 108
        • 8.4.7.21 LOGging:DEMand:VALue? <num>|MIN|MAX|DEF 108
        • 8.4.7.22 LOGging:LABel<n>:NAME? 108
        • 8.4.7.23 LOGging:LABel<n>:NAME <label> 109
      • 8.4.8 System Commands 109
        • 8.4.8.1 *IDN? 109
        • 8.4.8.2 *OPT? 109
        • 8.4.8.3 *RST 109
        • 8.4.8.4 SYSTem:BOOT:VERSion? 110
        • 8.4.8.5 SYSTem:CODE:VERSion? 110
        • 8.4.8.6 SYSTem:ERRor? 110
        • 8.4.8.7 SYSTem:SNUMber? 110
        • 8.4.8.8 SYSTem:VERSion? 110
        • 8.4.8.9 UNIT:TEMPerature? 111
        • 8.4.8.10 UNIT:TEMPerature <unit> 111
      • 8.4.9 Communication Interface Commands 111
        • 8.4.9.1 SYSTem:COMMunicate:SERial:BAUD? [MIN|MAX|DEF] 111
        • 8.4.9.2 SYSTem:COMMunicate:SERial:BAUD <baud>|MIN|MAX|DEF 111
        • 8.4.9.3 SYSTem:COMMunicate:SERial:FDUPlex? [MIN|MAX|DEF] 111
        • 8.4.9.4 SYSTem:COMMunicate:SERial:FDUPlex <bool>|MIN|MAX|DEF 112
        • 8.4.9.5 SYSTem:COMMunicate:SERial:FEED? [MIN|MAX|DEF] 112
        • 8.4.9.6 SYSTem:COMMunicate:SERial:FEED <bool>|MIN|MAX|DEF 112
        • 8.4.9.7 SYSTem:COMMunicate:SERial:LINefeed? [MIN|MAX|DEF] 112
        • 8.4.9.8 SYSTem:COMMunicate:SERial:LINefeed <bool>|MIN|MAX|DEF 113
        • 8.4.9.9 SYSTem:COMMunicate:SERial:TIMe? [MIN|MAX|DEF] 113
        • 8.4.9.10 SYSTem:COMMunicate:SERial:TIMe <num>MIN|MAX|DEF 113
        • 8.4.9.11 SYSTem:KLOCkout? [MIN|MAX|DEF] 113
        • 8.4.9.12 SYSTem:KLOCkout <bool>|MIN|MAX|DEF 113
        • 8.4.9.13 SYSTem:POWer:BATTery? 114
        • 8.4.9.14 SYSTem:POWer:SOURce? 114
      • 8.4.10 Date and Time Commands 114
        • 8.4.10.1 DISPlay:DATE:FORMat? [MIN|MAX|DEF] 114
        • 8.4.10.2 DISPlay:DATE:FORMat <num>|MIN|MAX|DEF 114
        • 8.4.10.3 DISPlay:TIME:FORMat? [MIN|MAX|DEF] 115
        • 8.4.10.4 DISPlay:TIME:FORMat <num>|MIN|MAX|DEF 115
        • 8.4.10.5 SYSTem:DATE? [MIN|MAX|DEF] 115
        • 8.4.10.6 SYSTem:DATE <year>,<month>,<day> 115
        • 8.4.10.7 SYSTem:TIME? 116
        • 8.4.10.8 SYSTem:TIME <hour>,<minute>,<second> 116
      • 8.4.11 Password Commands 116
        • 8.4.11.1 SYSTem:PASSword:CDISable 116
        • 8.4.11.2 SYSTem:PASSword:CENable <pass> 116
        • 8.4.11.3 SYSTem:PASSword:CENable:STATe? 116
        • 8.4.11.4 SYSTem:PASSword:CONVersion? [MIN|MAX|DEF] 117
        • 8.4.11.5 SYSTem:PASSword:CONVersion <bool>|MIN|MAX|DEF 117
        • 8.4.11.6 SYSTem:PASSword:NEW <pass> 117
      • 8.4.12 Status Commands 118
        • 8.4.12.1 *CLS 118
        • 8.4.12.2 *ESE? 118
        • 8.4.12.3 *ESE <num>|MIN|MAX|DEF 118
        • 8.4.12.4 *ESR? 118
        • 8.4.12.5 *SRE? 118
        • 8.4.12.6 *SRE <num>|MIN|MAX|DEF 118
        • 8.4.12.7 *STB? 118
        • 8.4.12.8 *TST? 119
        • 8.4.12.9 STATus:MEASure? 119
        • 8.4.12.10 STATus:MEASure:CONDition? 119
        • 8.4.12.11 STATus:MEASure:ENABle? 119
        • 8.4.12.12 STATus:MEASure:ENABle <num> 119
        • 8.4.12.13 STATus:OPERation? 120
        • 8.4.12.14 STATus:OPERation:CONDition? 120
        • 8.4.12.15 STATus:OPERation:ENABle?[MIN|MAX|DEF] 120
        • 8.4.12.16 STATus:OPERation:ENABle <num>|MIN|MAX|DEF 120
        • 8.4.12.17 STATus:QUEStionable? 120
        • 8.4.12.18 STATus:QUEStionable:CONDition? 121
        • 8.4.12.19 STATus:QUEStionable:ENABle? [MIN|MAX|DEF] 121
        • 8.4.12.20 STATus:QUEStionable:ENABle <num>|MIN|MAX|DEF 121
      • 8.4.13 Statistical Calculation Types 122
      • 8.4.14 Field Types 122
      • 8.4.15 Conversion Types and Parameters 124
      • 8.4.16 Port Numbers 125
      • 8.4.17 Date and Time Formats 126
  • 9 Calibration 127
    • 9.1 PRT and Thermistor Calibration 127
      • 9.1.1 PRT Calibration Parameters 127
      • 9.1.2 PRT Calibration Procedure 128
      • 9.1.3 Thermistor Calibration Parameters 129
      • 9.1.4 Thermistor Calibration Procedure 129
    • 9.2 Thermocouple Calibration 130
      • 9.2.1 Calibration Parameters 130
      • 9.2.2 Calibration Procedure 131
  • 10 Maintenance 133
  • 11 Troubleshooting 135
    • 11.1 Troubleshooting 135
      • 11.1.1 Self-Test Error Messages 136
      • 11.1.2 Start-up Error Messages 137
    • 11.2 Downloading Auto Logged Data 137
    • 11.3 CE Comments 138
      • 11.3.1 EMC Directive 138
        • 11.3.1.1 Immunity Testing 139
        • 11.3.1.2 Emission Testing 139
      • 11.3.2 Low Voltage Directive (Safety) 139
    • 11.4 Frequently Asked Questions 139
      • 11.4.1 Battery 139
      • 11.4.2 Input 140
      • 11.4.3 Logging 141
      • 11.4.4 Output 141
      • 11.4.5 Other 142
• Figures
  • Figure 1 Using the Clamp-on Ferrites 12
  • Figure 2 Front Panel 15
  • Figure 3 Back Panel 16
  • Figure 4 Thermocouple Connections 21
  • Figure 5 Probe Connection Wiring Diagram 22
  • Figure 6 Main Menu 27
  • Figure 7 Measure Period 28
  • Figure 8 Channel Menu 28
  • Figure 9 Enable Channel 30
  • Figure 10 Channel Mode 31
  • Figure 11 Moving Average 32
  • Figure 12 Display Options 33
  • Figure 13 Probe Menu 34
  • Figure 14 Edit Probe 35
  • Figure 15 Copy Probe 42
  • Figure 16 Test Probe 43
  • Figure 17 Print Probe 44
  • Figure 18 Default Probe 45
  • Figure 19 Clear Stats 46
  • Figure 20 Fields Menu 46
  • Figure 21 Select Fields 47
  • Figure 22 Edit Fields 49
  • Figure 23 Default Fields 50
  • Figure 24 Display Options 51
  • Figure 25 Logging Menu 52
  • Figure 26 Demand Log Submenu 53
  • Figure 27 Store Readings 54
  • Figure 28 Log History 55
  • Figure 29 Demand Log View Data 56
  • Figure 30 Print Data 57
  • Figure 31 Delete Data 58
  • Figure 32 Logging Options 59
  • Figure 33 Auto Log Submenu 59
  • Figure 34 Log Statistics (Auto Log Started) 61
  • Figure 35 Start Stop 61
  • Figure 36 Auto Log View Data 62
  • Figure 37 Print Data 63
  • Figure 38 Delete Data 64
  • Figure 39 Log Stats 65
  • Figure 40 Data Labels 66
  • Figure 41 Default Labels 67
  • Figure 42 System Menu 68
  • Figure 43 Comm Setup 69
  • Figure 44 Date Time 71
  • Figure 45 Password 72
  • Figure 46 Password for Calibration Access 73
  • Figure 47 Select Calibration Channel 74
  • Figure 48 Pass Cal Reset 75
  • Figure 49 Serial Cable Wiring 77
  • Figure 50 Using a Shorting Wire 128
• Tables
  • Table1 International Electrical Symbols 1
  • Table 2 Conversion Types 36
  • Table 3 Alphabetical List of Commands 79
  • Table 4 Statistical Calculation Types 122
  • Table 5 Field Types 122
  • Table 6 Reference (REF) Keywords 123
  • Table 7 Conversion Types, Mnemonics, and Serial Port Responses 124
  • Table 8 Conversion Types and Parameters 124
  • Table 9 RJC Settings 125
  • Table 10 Port Numbers 125
  • Table 11 Date Formats 126
  • Table 12 Time Formats 126
  • Table 13 PRT and Thermistor Calibration Parameter Description 127
  • Table 14 Calibration Parameters 131
• Index
  • !
    • 2-wire probe 37 - 38
    • 3-wire probe 37 - 38
    • 4-wire probe 37 - 38
  • A
    • AC adapter 19, 23
    • accessories 17
    • ASTM E1137 38
    • AUTO LOG 58
    • AUTO-CAL 33
    • average 31
  • B
    • backlight 23, 33, 51
    • battery 19, 23
      • charging 19
    • baud rate 69
    • buttons 15, 137
  • C
    • calibration 127, 137
    • CALIBRATION 73
    • CALIBRATION EXPIRED 137
    • Callendar-Van Dusen 38
    • channel
      • selection 30
    • CHANNEL menu 27
    • CHANNEL MODE 31
    • CLEAR STATS 46
    • coefficients
      • probe 36, 39, 135
    • COMM SETUP 68
    • commands 78
    • communication 68, 77
    • conformity 138
    • contrast 15, 23, 136
    • COPY PROBE 42
    • CVD 38
  • D
    • DATA LABELS 59, 65
    • data logging 25, 58, 137
    • date 48, 70
    • DATE TIME 70
    • DC power 23
    • decimal 33, 51
    • DEFAULT FIELDS 49
    • DEFAULT LABELS 66
    • DEFAULT PROBE 44
    • DELETE DATA 57, 63
    • delta temperature 48
    • DEMAND LOG 52
    • difference temperature 48
    • DIN-43760 38
    • display 19
      • backlight 23, 33, 51
      • contrast 15, 23, 136
      • data 47 - 49
      • fields 47 - 49
    • DISPLAY OPTIONS 32
  • E
    • EDIT FIELDS 49
    • EDIT PROBE 34
    • EMC 138
    • ENABLE CHANNEL 30
    • environment 10
    • error 136
    • exit 15, 27
  • F
    • fast measurement 24, 29
    • features 7, 15
    • field data 47 - 49
    • FIELDS menu 45
    • filter 31
  • G
    • GPIB 77
    • GPIB port 70
  • I
    • IEC-751 38
    • IEEE-488 70, 77
    • ITS-90 36 - 37
  • L
    • lamp 33, 51
    • linefeed 69
    • log count 60
    • LOG HISTORY 54
    • log period 60
    • LOG STATS 64
    • logging 25, 58, 137
    • LOGGING menu 51
    • LOGGING OPTIONS 59
  • M
    • maintenance 133
    • MEASURE PERIOD 28, 60
    • measurement 13, 23
    • memory 137
    • menu 15, 27
    • menu functions 27
    • MOVING AVERAGE 31
  • P
    • parts and controls 15
    • password 34, 42, 71, 73, 75
    • PASSWORD 71
    • PASSWORD INCORRECT 34, 42, 72 - 73, 75
    • period
      • logging 60
      • measurement 28, 60
      • serial 69
    • polynomial 41
    • power 12, 23
    • PRINT DATA 56, 63
    • PRINT PROBE 43
    • printing
      • serial 69
    • probe 21, 34 - 35
      • coefficients 36, 39
      • password 72
      • serial number 35
      • type 35
      • wires 21, 37 - 39
    • PROBE menu 33
    • PRT 21
    • PT-100 38
  • R
    • rack mounting 17
    • range
      • resistance 37 - 39
    • reference junction 41, 48
    • reset 75
    • resistance 39, 48
    • resolution 33, 51
    • RJC 41
    • RS-232 69, 77
    • RTD 38
  • S
    • scan 31
    • SELECT FIELDS 47
    • self-test 23, 136
    • sensor 21
    • serial interface 77
    • serial number 35, 67
    • serial period 69
    • serial port 69
    • specifications 9
    • START 60
    • statistics 46, 48
    • Steinhart-Hart 39
    • STOP 60
    • STORE READING 53
    • SYSTEM menu 67
    • SYSTEM RESET 75
  • T
    • TEST PROBE 43
    • thermistor 21, 39 - 40
    • thermocouple 21, 41
    • time 48, 70
    • troubleshooting 135
    • type
      • probe 35
  • U
    • units 15, 19
  • V
    • version
      • firmware 67
    • VIEW DATA 55, 62
    • volts 40, 48
  • W
    • wires
      • probe 21, 37 - 39
  • Y
    • YSI-400 40