M-S Cash Drawer A794 - Manual (Page 128)

A794 Owner’s Guide Chapter 6: Programming Information
December 1999 123
Print Bar Code (continued)
Second Variation Length of Byte Specified at Beginning of String
The value of m selects the bar code system as described in the table. When details
present in the print buffer, the printer processes the data following m as normal data.
The variable d indicates the character code to be encoded into the specified bar code
system. See the table. If character code d cannot be encoded, the printer prints the bar
code data processed so far, and the following data is treated as normal data.
m Bar Code d n, Length
65 UPC-A 48- 57 (ASCII numerals) Fixed Length: 11, 12
66 UPC-E 48- 57 Fixed Length: 11, 12
67 JAN13 (EAN) 48- 57 Fixed Length: 12, 13
68 JAN8 (EAN) 48- 57 Fixed Length: 7, 8
69 CODE39 48- 57,
65- 90 (ASCII alphabet),
32, 36, 37, 43, 45, 46, 47 (ASCII special
characters)
d1 = dk = 42 (start/stop code is
supplied by printer if necessary) Variable
70 Interleaved 2 of 5 (ITF) 48- 57 Variable (Even Number)
71 CODABAR (NW-7) 65- 68, start code
48- 57,
36, 43, 45, 46, 47, 58 Variable
72 Code 93 48- 57, 65- 90 (ASCII alphabet),
32, 36, 37, 43, 45, 46, 47 (ASCII special
characters)
d1 = dn = 42 (start/stop code is
supplied by printer if necessary) Variable
73 Code 128* 0-105
d1 = 103-105 (must be a Start code)
d2 = 0-102 (data bytes)
(Stop code is provided by the printer) Variable
75 PDF 417 0-255 Variable Length
Exceptions: Code 93 and PDF 417 are only available in A794 Native Mode.
Select Bar Code Width
ASCII GS w n
Hexadecimal 1D 77 n
Decimal 29 119 n
Value of n: 2, 3, 4, 5, 6
Default: n=3
Sets the bar code width to n dots.
Formulas
n+1/8 mm (n+1/203 inch).