M-S Cash Drawer A794 - Manual (Page 76)

A794 Owner’s Guide Chapter 6: Programming Information
December 1999 71
Print and Feed Paper
ASCII ESC J n
Hexadecimal 1B 4A n
Decimal 27 74 n
Value of n: n/203 inch in A794 Native Mode and TM-T88 Emulation Mode
n/360 inch in A793 Emulation Mode
Range of n: 0-255
Prints one line from the buffer and feeds the paper n/8 mm (n/203 inch). The line
height equals the character height when n is too small.
If the Set Horizontal and Vertical Minimum Motion Units command (1D 50) is used to
change the horizontal and vertical minimum motion units, the parameters of this
command (Print and Feed Paper) will be interpreted accordingly.
Related Information
For more information, see the description of the Set Horizontal and Vertical Minimum
Motion Units command in this document.
Print and Feed n Lines
ASCII ESC d n
Hexadecimal 1B 64 n
Decimal 27 100 n
Range of n: 1-255 (0 is interpreted as 1)
Prints one line from the buffer and feeds paper n lines at the current line height.
Set Horizontal and Vertical Minimum Motion Units
ASCII GS P x y
Hexadecimal 1D 50 x y
Decimal 29 80 x y
Value of x: Horizontal
Value of y: Vertical
Range of x: 0 – 255
Range of y: 0 – 255
Default of x: 203
Default of y: 203
Sets the horizontal and vertical motion units to 1/x inch and 1/y inch respectively.
When x or y is set to 0, the default setting for that motion unit is used.