M-S Cash Drawer A794 - Manual (Page 91)

Chapter 6: Programming Information A794 Owner’s Guide
December 1999 86
Select or Cancel Emphasized Mode
ASCII ESC E n
Hexadecimal 1B 45 n
Decimal 27 69 n
Value of n: 0 (bit 0) not selected
1 (bit 0) selected
(When 0 and 1 are the Least Significant Bit, LSB)
Range of n: 0-255
Default: 0 (Off)
Starts or stops emphasized printing. The printer is reset to the standard Print Mode
after a Clear Printer (0x10) command is received.
Exceptions
Only the lowest bit of n is effective.
Emphasized printing cannot be used with bit-images or downloaded bit-images.
Related Information
This command and the Select Print Mode(s) command (1B 21) function identically. They
should have the same setting when used together.
In A793 Emulation, this command is unrecognized and the parameter byte is put into
the print buffer.
Select or Cancel Double Strike
ASCII ESC G n
Hexadecimal 1B 47 n
Decimal 27 71 n
Value of n: 0 = Off
1 = On
(When 0 and 1 are the Least Significant Bit, LSB)
Default: 0 (Off)
Turns double strike mode on or off. Identical to Emphasized mode. The printer is reset
to the standard Print Mode after a Clear Printer (0x10) command is received.
Exceptions
Only the lowest bit of n is effective. The settings do not apply in Page Mode. However
they can be set or cleared in Page Mode.
Double-strike printing cannot be used with bit-images or downloaded bit-images.
Related Information
This command and the Select Print Mode(s) command (1B 21) function identically. They
should have the same setting when used together.
In A793 Emulation, this command is unrecognized and the parameter byte is put into
the print buffer.