M-S Cash Drawer A794 - Manual (Page 52)

A794 Owner’s Guide Chapter 5: Communication Interface
December 1999 47
RS-232C Settings
The printer supports the standard RS-232C settings:
Baud Rate 1200, 2400, 4800, 9600, 19.2 K, 38.4 K, 57.6 K, 115.2 K
Parity Parity Enabled, Parity Disabled, Even Parity, Odd Parity
Flow Control Method XON/XOFF, DTR/DSR
Data Reception Errors Print “?” for Data Errors, Ignore Data Errors
Generally the printer is shipped with all the RS-232C parameters pre-set at the factory.
If you need to change any of these settings, you can do so using the configuration menu
feature.
This feature prints instructions on the receipt for changing the RS-232C settings (in
addition to other settings).
For more information about See this section
Changing the RS-232C settings
through the configuration menu “Diagnostics and Configuration”
in the A794 Service Guide