M-S Cash Drawer A794 - Manual (Page 56)

A794 Owner’s Guide Chapter 6: Programming Information
December 1999 51
List of Commands and Location
Commands control all operations and functions of the printer. This includes selecting
the size and placement of characters and graphics on the receipt to feeding and cutting
the paper. The operation of various printers may be emulated by the commands,
including the following:
♦
Axiohm A793
♦
Axiohm A794 Native Mode
♦
Epson TM-T88
Any of the commands may be used in any combination to program a host computer to
communicate with the printer (unless otherwise noted).
Some commands listed and described here may not be implemented. They will be
identified as “not implemented”. If received, they are ignored and not sent to the print
buffer as data. Any non-legal commands are sent to the print buffer as data.
All items in BOLD are new or have additional functionality when compared to the
A793.
By Command Code
Code (Hexadecimal) Command Page
09 Horizontal Tab 72
0A Print and Feed One Line 68
0C Print and Return to Standard Mode 124
0D Print and Carriage Return 68
10 Clear Printer 61
10 04 n Real Time Status Transmission (DLE Sequence) 112
10 05 n Real Time Request to Printer (DLE Sequence) 115
11 n1...n72 Print Raster Graphics 92
12 Select Double-Wide Characters 79
13 Select Single-Wide Characters 79
14 n Feed n Print Lines 68
15 n Feed n Dot Rows 69
16 n Add n Extra Dot Rows 69
17 Print 70
18 Cancel Print Data in Page Mode 124
19 Perform Full Knife Cut 61
1A Perform Partial Knife Cut 62
1B (+*.bmp) Download BMP Logo 93
1B 07 Generate Tone 62
1B 0C Print Data in Page Mode 125
1B 12 Select 90 Degree Counter-Clockwise Rotated Print 80
1B 14 n Set Column 72
1B 16 n Select Pitch (Column Width) 80
1B 20 n Set Right-Side Character Spacing 81