M-S Cash Drawer A794 - Manual (Page 27)

Chapter 3: Media and Supplies Guide A794 Owner’s Guide
December 1999 22
Ordering Thermal Paper
Thermal Paper Specifications
The printer requires qualified thermal paper with the following dimensions:
Width Diameter Length
80 mm ± .2 mm (3.15 in. ± .02 in.) 90 mm max. (3.54 in.) 322 ft. nominal.
82.5 mm ± .2 mm (3.25 in. ± .02 in.) 90 mm max. (3.54 in.) 322 ft. nominal.
The paper must not be attached at the core. Use paper with a colored stripe at the end
to indicate that the paper is running low.
The above figures are based on a core diameter of 22 ± .5 mm (.87 in.) outside,
11.5 ± .5 mm (.45 in.) inside.
Manufacturers
Axiohm recommends the following paper grades produced by their respective
manufacturers. There are a number of paper converters qualified to provide this paper,
provided the POS rolls are from these recommended grades.
Qualified Manufacturers Phone Paper Grade (Density)
Appleton Papers, Inc. (USA)
825 E Wisconsin Ave.
Appleton, WI 54912 Voice: 800-922-1729
Voice: 920-734-9841
Fax:
800-922-1712
Optima T1030 (Light)
Optima T1012A (Standard)
Optima T1062A-16 (Standard)
Optima Superior (Standard)
Kanzaki Specialty Papers (USA)
20 Cummings St.
Ware, MA 01082-2002 Voice: 888-526-9254
Voice: 413-736-3216
Fax:
413-731-8864
P-300 (Light)
P-310 (Standard)
P-350 (Standard)
P-354 (Standard)
TO-260 (Standard)
TO-282 (Standard)
TO-381L (Standard)
Jujo Thermal LTD.
P.O. Box 92 FIN-27501
Kauttua, Finland Voice: 358-38-393-2900
Fax:
358-38-393-2419
AF50KS-E3 (Standard)
AP62KS-E3 (Standard)
How to Order
To order paper rolls, contact your converter of choice. Axiohm can provide the
following paper in small lots to facilitate product evaluation and testing. To order
directly from Axiohm, use the following part numbers:
♦
Standard Density 50 Rolls, 90 mm diameter Axiohm #A152-0034
♦
Light Density 50 Rolls, 90 mm diameter Axiohm #A152-0035