M-S Cash Drawer A794 - Manual (Page 97)

Chapter 6: Programming Information A794 Owner’s Guide
December 1999 92
Graphics Commands
These commands are used to enter and print graphics data and are described in order of
their hexadecimal codes.
These commands describe operation for 80 mm paper. If the printer supports 82.5 mm
paper, the dot spacing is the same but there are 640 printable dots rather than 576
printable dots on 80 mm paper.
Print Raster Graphics
ASCII DC1 n1 ...nl
Hexadecimal 11 n1 ...n72
Decimal 17 n1 ...nl
Value of n: n1…n72 = Data bytes
Range: 0-255
Prints one row of data. n1 . .. nl: bytes describing the line to print.
Exceptions
Raster graphics is not available in Page Mode.
Related Information
This command is recognized only in A794 Native Mode.
In A793 and TM-T88 Emulations, the data bytes are put into the print buffer.