M-S Cash Drawer A794 - Manual (Page 35)

Chapter 4: Print Specifications A794 Owner’s Guide
December 1999 30
Print Density and Density of Receipt Print Lines
This function makes it possible to adjust the energy level of the printhead to darken the
printout. An adjustment should only be made when necessary. The factory setting is
100%.
Warning: Choose an energy level no higher than necessary to achieve a dark printout.
Failure to observe this rule may result in a printer service call or voiding of the printer
warranty. Consult your Axiohm technical support specialist if you have any questions.
When the printer prints high density print lines (text or graphics), it automatically slows
down.
To change the Print Density:
1. Enter the Configuration Menu.
2. Select “Set Hardware Options” from Main Menu.
“Hardware Options Menu” is printed on the receipt and the question “Set Print
Density?” asked.
3. Answer YES (Long click).
A warning is printed, followed by:
Print Density
100% 1 Click
110% (+) 2 Clicks
120% (++) 3 Clicks
Enter code, then hold Button DOWN at least 1 second to validate.