Figure435 hi hardware–dma mode, Figure 4-35, Hi hardware–dma mode -60 – Motorola DSP56012 User Manual
Page 140: Figure 6-10, Figure 4-35 hi hardware–dma mode, Parallel host interface host interface (hi)
Advertising
4-60
DSP56012 User’s Manual
MOTOROLA
Parallel Host Interface
Host Interface (HI)
Figure 4-35 HI Hardware–DMA Mode
+5 V
DMA
CONTROLLER
TRANSFER REQUEST
TRANSFER
ACKNOWLEDGE
DSP56012
HOST INTERFACE
HOREQ
HACK
INTERNAL
ADDRESS
COUNTER
H[7:0]
1 K
MEMORY
R/W
CONTROL
ADDRESS
DATA
Characteristics of HI DMA Mode
• The HOREQ pin is NOT available for host processor interrupts.
• TREQ and RREQ select the direction of DMA transfer.
—DMA to DSP56012
—DSP56012 to DMA
—Simultaneous bidirectional DMA transfers are not permitted.
• Host processor software polled transfers are permitted in the opposite direction of the DMA transfer.
• 8-, 16-, or 24-bit transfers are supported.
• 16-, or 24-bit transfers reduce the DSP interrupt rate by a factor of 2 or 3, respectively.
AA0341k
Advertising