Muratec F-150 - Manual (Page 35)

2.6
Beyond the basics
Setting silent mode
If you and your fax machine share a quiet place, you’ll really appreciate being able to
put the machine into silent mode. This mutes both the ringer and the “I’m done!” beep
your machine makes after sending or receiving a fax or making a copy.
Note: Let’s say it again — silent mode mutes the ringer as well as the beep. So, if
you’re using your fax machine as both a fax and phone (with the optional
handset), you may not wish to use this feature.
Note: Of course, turning on the silent mode on your fax machine won’t turn off
ringers on other telephones in your house or office. Similarly, other phones
won’t distinguish between fax and voice calls.
1 Press / PROGRAM , J , 1, 5, ENTER . The LCD shows your fax’s current setting:
If the setting you see is acceptable, skip to step 3.
Otherwise, proceed to step 2.
2 To change the setting, press or / PROGRAM once or twice until your chosen
setting appears. In this example, we’ve chosen On.
Note: Don’t be confused. If silent mode is On, the machine will be quiet.
If silent mode is Off, the machine will ring and beep as usual.
(In other words, the Off/On refers to the silent mode setting,
not to the sound itself!)
3 Press ENTER to save the setting.
Setting the transmission confirmation stamp
You can set your fax machine so that it will automatically place a small stamp mark
on the front of each original document that it successfully scans.
Important: Be sure that this feature is turned off if you are sending original docu-
ments you don’t want the fax to stamp.
1 Press / PROGRAM , J , 2, 0, ENTER . The LCD shows your fax’s current setting:
If the setting you see is acceptable, skip to step 3.
Otherwise, proceed to step 2.
2 To change the setting, press or / PROGRAM once or twice until your chosen
setting appears. In this example, we’ve chosen On.
3 Press ENTER to save the setting.
Stamp: On
Program/Enter
Stamp: Off
Program/Enter
Silent Mode: On
Program/Enter
Silent Mode: Off
Program/Enter