Muratec F-150 - Manual (Page 40)

Beyond the basics
3 Toggle between transmission from the feeder or from memory if necessary, by
pressing
MEMORY TRANSMIT .
4 Press the one-touch key in which you’ve stored the number.
The machine will handle the call from here, although the exact sequence of events
will vary depending upon whether you specified transmission from memory or
transmission from the feeder:
If you specified transmission from memory:
• Your fax machine scans your document into memory first, then dials the other
fax machine.
• The LCD shows the Location ID and the document’s width and resolution settings:
Note: If the number doesn’t have a Location ID , the number appears.
• When the other machine answers, your fax will transmit the document directly
from memory. (To review memory transmission, see pages 1.14–1.15.)
If you specified transmission from the feeder:
• Your fax machine dials the other fax machine.
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes.
• The LCD shows the Location ID and the document’s width and resolution settings:
Note: If the number doesn’t have a Location ID , the number appears.
One-touch phone dialing
To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your authorized Muratec dealer for more infor-
mation on this optional item.)
Here’s how to make the call:
1 Obtain a dial tone by doing one of the following:
• Lifting the handset
• Press
MONITOR / CALL to use the monitor speaker.
Katz’s Cat Care
A4 Normal
Katz’s Cat Care
A4 Normal
2.11