Intermec 6400 - Manual (Page 100)

Terminal Emulation Menu Screens SECTION 3
3-28 6400 Hand-Held Computer User’s Guide
1) Enabled
2) Disabled
Extended Cmds
1. Press [1] to enable the extended command set, or
press [2] to disable the extended command set.
2. Press [ENT] to return to the Protocol Opts menu.
5250 Options
The 5250 Options menu lets you enable the following fea-
tures if you are using the 5250 communication protocol:
"
Beep On Error
"
Auto Tab Scan
"
Telnet
1) Beep On Error
2) Auto Tab Scan
3) Telnet
4)
5)
6) Device Name
5250 Options
Enabling Beep On Error causes the buzzer to sound when
an error condition occurs, but allows you to continue wor-
king. Normally, when an error occurs the keyboard locks-
up, the hand-held computer must be reset either from the
host or the RESET key on the hand-held computer itself.
The Auto Tab Scan option causes the cursor to automatical-
ly tab forward to the next input field when a good scan is
obtained.