Intermec 6400 - Manual (Page 121)

SECTION 3 Terminal Emulation Menu Screens
6400 Hand-Held Computer User’s Guide 3-49
1) Radio Test
2) RS232 Test
3) Display Test
4) Keyboard Test
5) Scanner Test
Peripherals
802.11 radio’s
only.
802.11 Radio Test
PRI: v4.0
SEC: v4.13
RFLINK: ssssss
SNR: 99dBm
SSID: ssss
B SSID: xxxxxxxxxxxx
TxRated:xMb/s std
Radio Test
Adequate
Dummy
MAC Address
"
Pri, is the primary version of low--level radio firm-
ware.
"
Sec, is the secondary version of the low--level radio
firmware.
"
RFLink, is a general description of the overall quality
of RF connection between the Lucent radio in the 6400
(station) and the radio in the AP. The Lucent radio
grades the RF link on a scale between 0 and 92. This
value represents the RF channel Signal-to-Noise Ra-
tio. The RF link quality descriptions are assigned as
shown in this table.
Table 3-1
Possible RF Link Descriptions
SNR Description
0 .. 23 Adequate
24 .. 47 Good
48 .. 92 Excellent